Pneumatic conveying is a commonly used method for grain loading, unloading, and transfer; however, it is also the stage where the grain breakage rate is most prone to spiraling out of control. This paper examines grain pile handling operations on-site to dissect three key selection criteria for hoses and their corresponding correlations with anti-static ratings.
(1) On-site issue: Hidden losses during unloading and transfer operations
When grain is unloaded from trucks onto grain piles and then conveyed from those piles to cleaning equipment, the most commonly used method is pneumatic conveying (negative-pressure grain conveying). A flexible hose is inserted into the grain pile, and a fan creates negative pressure to draw wheat, corn, or rice through the hose to designated locations. Although this step may seem simple, it is precisely where the grain damage rate is most prone to spiraling out of control.
Grains repeatedly impact the pipe wall within a high-velocity airflow; particularly during passage through bends, secondary impacts can cause cracks, peeling, and fragmentation of the grains. The harder the pipe wall and the rougher its inner surface, the more direct the impact force becomes. Simultaneously, if the hose is compressed due to negative pressure, the airflow velocity within the hose may rise abruptly; in such cases, the grains become densely packed within the narrowed cross-section, leading to both damage and pipe blockage occurring concurrently.
Additionally, the dust concentration at the grain pile suction and discharge site is high; if the flexible hose becomes electrostatically charged and lacks reliable grounding, dust will adhere to the inner walls of the hose and the pipeline supports. This not only compromises transport efficiency but also poses a safety risk of dust explosion.
(2) Three Key Selection Considerations
First, the inner wall should be smooth, and the material should be flexible. The elastic inner wall of polyester-based PU tubing provides a slight "buffer" when grains impact it, resulting in a significantly lower grain breakage rate compared to rigid tubes. This feature is particularly critical for grain feed and high-value commercial grains.
Secondly, the hose must feature a steel wire spiral reinforcement structure to ensure it does not collapse under negative pressure. Under negative pressure suction and delivery conditions, conventional flexible hoses are easily flattened. The Jiazhe 905/906 series incorporates an embedded steel wire spiral, which enables the hose to maintain its circular profile under sustained negative pressure, thereby ensuring stable cross-sectional airflow velocity and preventing grain accumulation that could lead to hose blockage.
Third, the appropriate level of anti-static and conductive properties must be selected. Grain dust is classified as a combustible dust; in accordance with the requirements of TRBS 2153, TRGS 727, and ATEX, flexible hoses equipped with electrostatic discharge capabilities should be used in such operating conditions. Jiazhe offers two levels:
Anti-static type (905S / 905S+ / 906S / 906ST): surface resistance of approximately 10⁹ Ω, flame retardancy rating HB; meets the static electricity discharge requirements for general grain transport.
Conductive type (955 / 956 / 956H / 957): resistivity ≤10⁴ Ω/M, complies with ISO 8031 requirements, and is suitable for applications where electrostatic sensitivity is particularly high; among these, 954PE is made of PE material, offering both conductivity and resistance to severe corrosion.
If the equipment already has a grounding structure, the 921FE / 923E / 934E models featuring embedded grounding copper wires may also be selected, allowing the current to be directly conducted to earth via the copper wires.
(3) Quick Reference for Recommended Models
|
operating mode |
Recommended Models |
|
Standard negative pressure grain harvesting system and anti-drooping tube |
905 / 906 |
|
Anti-static measures for dusty environments |
905S / 906S / 906ST |
|
Highly electrostatic-sensitive; requires conductivity |
955 / 956 / 956H |
|
Embedded grounding copper wire |
921FE / 923E / 934E |
|
Matching clamp |
991R |
The two key performance indicators for grain pneumatic conveying are breakage rate and conveying stability, both of which are determined by the material and construction of the hose. Selecting polyester-based PU steel-wire hoses, choosing the appropriate anti-static or conductive rating, and employing standardized grounding installation using 991R clamps can simultaneously reduce the risks of grain breakage and hose blockage.
The appropriate equipment selection should be based on your conveying capacity, conveying distance, and type of grain. Please feel free to contact the ZIMFLEX technical support team.

